Montana Post Drivers
350E TRex
| Energy Class | 350 ft/lb |
| Operating Weight | 200 lbs |
| Oil Flow | 5-20 gpm |
| Working Pressure | 1300-1500 psi |
| Chisel Shaft Diameter | 2.7″ |
| Driving Cup Diameter | 4 3/8″ inside diameter |
| Min. Skid Steer Lifting Capacity | 1500 lbs |
Description
Superior Design
Through Montana’s hydraulic concrete breaker-based design, posts are driven by jackhammering them into the ground. You maintain full control of the post while driving at a rate of 700 blows per minute. The domed cup design enables you to push and pull the post straight, and the attached chain serves as a plumb bob and depth gauge. Because all moving parts remain above the post, our design also allows the user to reach over an existing fence to drive posts on the other side.
Safety First
A single operator is able to drive straight and true fence posts without the assistance of a spotter, increasing job safety by keeping your operator in the seat of the loader and eliminating the need for someone to stand by the post. Montana’s design is not top-heavy like conventional products on the market. Low center of gravity reduces the chances of tip-over and allows for easy storage when detached.
Versatile & Durable
A Montana Post Driver accommodates wood, pipe, and T-posts, making it the most versatile equipment on the market. The frame and back plate are constructed from heavy steel plate for durability. This rugged, easy-to-operate post driver universally attaches to most skid loaders or excavators.
Easy to Maintain
A truly low-maintenance product, Montana’s driver allows for fast and simple disconnection and reconnection. The hydraulic hammer used has only two moving parts and a single grease fitting for easy lubrication.
750R Rancher
| Energy Class | 750 ft/lb |
| Operating Weight | 1400 lbs |
| Oil Flow | 11-18 gpm |
| Working Pressure | 2000 psi |
| Chisel Shaft Diameter | 2.7″ |
| Blow Rate (per minute) | 650-1400 |
| Driving Cup Diameter | 8″ outside diameter |
| Min. Skid Steer Lifting Capacity | 1500 lbs |
Description
Superior Design
Through Montana’s hydraulic concrete breaker-based design, posts are driven by jackhammering them into the ground. You maintain full control of the post while driving at a rate of 800 blows per minute. The domed cup design enables you to push and pull the post straight, and the attached chain serves as a plumb bob and depth gauge. Because all moving parts remain above the post, our design also allows the user to reach over an existing fence to drive posts on the other side.
Safety First
A single operator is able to drive straight and true fence posts without the assistance of a spotter, increasing job safety by keeping your operator in the seat of the loader and eliminating the need for someone to stand by the post. Montana’s design is not top-heavy like conventional products on the market. Low center of gravity reduces the chances of tip-over and allows for easy storage when detached.
Versatile & Durable
A Montana Post Driver accommodates wood, pipe, and T-posts, making it the most versatile equipment on the market. The frame and back plate are constructed from heavy steel plate for durability. This rugged, easy-to-operate post driver universally attaches to most skid loaders or excavators.
Easy to Maintain
A truly low-maintenance product, Montana’s driver allows for fast and simple disconnection and reconnection. The hydraulic hammer used has only two moving parts and a single grease fitting for easy lubrication.
1000E
| Energy Class | 1000 ft/lb |
| Operating Weight | 2000 lbs |
| Oil Flow | 13-24 gpm |
| Working Pressure | 2200 psi |
| Chisel Shaft Diameter | 3″ |
| Blow Rate (per minute) | 400-800 |
| Driving Cup Diameter | 9″ outside diameter |
| Min. Skid Steer Lifting Capacity | 2500 lbs |
Description
Superior Design
Through Montana’s hydraulic concrete breaker-based design, posts are driven by jackhammering them into the ground. You maintain full control of the post while driving at a rate of 800 blows per minute. The domed cup design enables you to push and pull the post straight, and the attached chain serves as a plumb bob and depth gauge. Because all moving parts remain above the post, our design also allows the user to reach over an existing fence to drive posts on the other side.
Safety First
A single operator is able to drive straight and true fence posts without the assistance of a spotter, increasing job safety by keeping your operator in the seat of the loader and eliminating the need for someone to stand by the post. Montana’s design is not top-heavy like conventional products on the market. Low center of gravity reduces the chances of tip-over and allows for easy storage when detached.
Versatile & Durable
A Montana Post Driver accommodates wood, pipe, and T-posts, making it the most versatile equipment on the market. The frame and back plate are constructed from heavy steel plate for durability. This rugged, easy-to-operate post driver universally attaches to most skid loaders or excavators.
Easy to Maintain
A truly low-maintenance product, Montana’s driver allows for fast and simple disconnection and reconnection. The hydraulic hammer used has only two moving parts and a single grease fitting for easy lubrication.
1500E
| Energy Class | 1500 ft/lb |
| Operating Weight | 2300 lbs |
| Oil Flow | 16-27 gpm |
| Working Pressure | 2300 psi |
| Chisel Shaft Diameter | 3.35″ |
| Blow Rate (per minute) | 400-800 |
| Driving Cup Diameter | 10″ outside diameter |
| Min. Skid Steer Lifting Capacity | 3000 lbs |
Description
Superior Design
Through Montana’s hydraulic concrete breaker-based design, posts are driven by jackhammering them into the ground. You maintain full control of the post while driving at a rate of 800 blows per minute. The domed cup design enables you to push and pull the post straight, and the attached chain serves as a plumb bob and depth gauge. Because all moving parts remain above the post, our design also allows the user to reach over an existing fence to drive posts on the other side.
Safety First
A single operator is able to drive straight and true fence posts without the assistance of a spotter, increasing job safety by keeping your operator in the seat of the loader and eliminating the need for someone to stand by the post. Montana’s design is not top-heavy like conventional products on the market. Low center of gravity reduces the chances of tip-over and allows for easy storage when detached.
Versatile & Durable
A Montana Post Driver accommodates wood, pipe, and T-posts, making it the most versatile equipment on the market. The frame and back plate are constructed from heavy steel plate for durability. This rugged, easy-to-operate post driver universally attaches to most skid loaders or excavators.
Easy to Maintain
A truly low-maintenance product, Montana’s driver allows for fast and simple disconnection and reconnection. The hydraulic hammer used has only two moving parts and a single grease fitting for easy lubrication.
Need A Person?
Speak to our expert sales team
Monday-Friday 8-5 CST
Need Help?
Skip the guess work and get a customized quote for your project from our Superior team